DIY Bedroom Closet With Sheets of Plywood for $100 | DIY | Woodworking Project

Build a custom closet for $100 using two sheet of 3/4in plywood. If you have a small closet and budget this design can fit any size closet. I provides great closet organization and space that can fit anyone’s organizational needs.


📹 $How To Add Drawers To The Closet 👉🏻

50 Free Woodworking Plans

📹 Pantry Video 👉🏻


In this DIY and Woodworking Project you will use one sheet for the center shelf and the second sheet for the top and side shelf.

I will show you how to use the space you have to organize and build shelving that fits your needs. The design can be modified to fit most any standard home or bedroom closet. All you need to do is follow the basic building principles and instructions and you can have a custom closet for $100.

I use used two 3/4in 4’x8′ birch plywood to create this custom bedroom closet. The total cost for this build is about $100. Yep that is right, $100 amazing right. This video will show you the basics of closet shelf building. I believe anyone can build amazing things.

If you have any questions about this build please post your comments below. Be sure do download the plans.

This is the pantry video that I referenced. The video will show you how I applied edge banding to my pantry build.


3/4”x48”x96” Plywood (2x) |


Titebond 3 (1x) | The best wood glue
Kreg Jig 1” 1/4” pan-head coarse screws (1box) |
1” 1/4” Brad Nails (1box) |
2” 1/2” Wood Screws (1 box) |
3” Wood Screws (1 box)
White Paint (1gal)
Wood Putty (1tub) |
180 Grit Sandpaper (1 pack) |
Heavy Duty Closet Flange (3x) |
Heavy Duty Closet Pole (2x) You will cut them down to size |

——————— TOOLS ———————–
This is a list of my basics tools that I use for my woodworking and build project. You should be able to make just about everything with these tools.

• Miter Saw |
• Table Saw |
• Drill Kit |
• Orbital Sander |
• 24 in. Quick Grip Clamps (4 clamps) |
• Cordless Nail Gun Kit |
• Level |
• Hammer |
• Tape Measure |
• Putty Knife |
• Kreg Pocket Hold Jig |
• Kreg Face Clamp |
• Micro Jig GRR Ripper |
• Earlex HV5500 HVLP Sprayer |

——————— FOLLOW ——————-

Subscribe —
Instagram —
Facebook —
Twitter —
Pinterest —

——— Cameras and Gear Used To Shoot My Videos ———

Main Camera |
Main Lens |
Secondary Lens |
Audio Camera Mic |
Voice Over Mic |
Lights |
Laptop |
Editing Software |

#Woodworking #HomeImprovement #DIY #Design

DISCLAIMERS | Some of these links have an affiliate code, if you purchase tools or gear with these links I will receive a small commission at no additional cost to you. This helps cover my build materials. Thank you!

Leave a Reply

Your email address will not be published. Required fields are marked *