I made this DIY Toy Box from Scrap Wood I had around and you can too. This is an easy project for beginner woodworkers. Grab yourself a cup of coffee and watch how easy it is to make this! This makes great toy storage for your kids rooms and playrooms.
Wood Cuts:
-Corner Piece 2x4s cut at 16.5 inches
-6 Boards cut at 23.5 inches
-6 boards cuts at 21.5 inches
-NOTE: I cut the plywood bottom last to line up with the toy box dimensions.
♥♥ for the FULL Tutorial go here:
♥ Subscribe to my channel:
♥ Supplies needed*:
• 2×4, 1×12 or cedar boards, and 1/4 plywood –
•Wood Stain – I used Early American –
•Polyurethane –
•Miter Saw or circular saw:
•Sandpaper or Orbital Sander:
•Drill –
•Forstner Drill Bit-
•Rope for handles –
•Wood Screws –
• Caster Wheels –
♥LIKE & COMMENT :
Tell me what videos you’d love to see! Thank you so much!
Music: Mint leaves
Musician: Jeff Kaale
______________________________________
WATCH:
♥Click here to SUBSCRIBE:
READ:
♥Visit the Blog:
SHOP:
♥Shop our Home: liketoknow.it/decorhint
♥Amazon Favorites (*aff link):
♥Vintage Prints (*aff link):
CONNECT WITH ME:
♥Follow Me on INSTAGRAM: @decorhint
♥Pin with Me on PINTEREST:
♥Email / Business Inquiries: karen@decorhint.com
♥Get a DIY/decorating tip weekly:
______________________________________
*Affiliate Links (*aff link) – I may earn a small commission if you make a purchase through these links, and at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases.